Huepar S04CG-L - 4 x 360° Self-Leveling Laser Cross Line Laser Tiling Floor Laser Tool

• 4 X 360° WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.

• TRIPLE POWER METHODS & TYPE-C CHARGING PORT: This 360 laser tool adopted large capacity Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

• MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.

• OUTDOOR PULSE MODE: This laser level projects green laser beam which is 4 times brighter than standard red beams with a working range up to 130Ft of an accuracy +/- 1/9" at 33Ft. Besides highly visible green beam, the pulse mode function extends laser working range up to 200Ft with Huepar LR-5RG/LR-6RG Line Laser Receiver in bright light or outdoor conditions and continuous working time.

• DURABLE DESIGN & PACKAGE CONTENTS: The laser offers 1/4"-20 mount thread to suit a standard tripod or pole mount. The laser tool is covered by TPR soft rubber, which delivers soft touch and stronger protection. IP54 water/dust resistance help withstand tough job site conditions.

With advanced laser level technology, Huepar is committed itself to providing solutions for a wide variety of applications of greater accuracy and precision. Shop Huepar cross line laser level, complete your projects more efficiently and with greater ease.

S04CG-L 4 x 360° Green Beam Floor Cross Line Laser Level Specifications:

• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
• Number of Lines: Two 360° horizontal floor laser lines & Two 360° Vertical laser lines
• Laser Wavelength: 505-520nm
• Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft.
• Leveling/Compensation Range: ±3.5°
• Working Distance (Line): 130Ft (100 LUX), 200Ft. with Huepar Receiver LR-5RG/LR-6RG
• Power Source: Li-ion battery & 4×AA (LR6) batteries
• Operating Time: with Lithium Battery: 5 hours with all laser beams on; with AA Batteries: 0.5 hours with all laser beams on
• IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
• Mount Size: 1/4"-20

WARNING: Do not point the laser beam directly into the eyes. The device is a laser class 2 laser product according to IEC / EN60825-1 / 2014. It is allowed to use the device without any further safety precautions. The eye protection is usually secured by aversion reactions and blink reflex.

4 X 360°Laser Lines & Line Switching :

• This cross line laser level provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation.
• Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
• Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.
• The four laser lines can be selected individually depends on job site applications.
• Huepar S04CG-L laser level is a complete tool to cover the floor, wall, ceiling all around the room.

Self-leveling mode&Manual mode

Self-leveling mode:

Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3.5°.

Manual mode:

When the pendulum is in the locked position, the laser tool can be placed for use at any angle.

The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now.

In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity.

Cross Line Laser Level Package Contents

• 1 x 4D Green Tiling Laser Level S04CG-L
• 1 x Rechargeable Li-ion Battery
• 1 x Power Adapter& Type-C cord
• 4 x AA (LR6) Batteries & 1 x AA Battery Holder
• 1 x Magnetic Bracket
• 1 x Lifting Base
• 1 x Steel Sheet
• 1 x Laser Target Plate
• 1 x Laser Level User Manual
• 1 x Portable Bag

1 x Huepar S04DG-L
1 x 7.4V / 2600mAh Li-ion battery
1 x magnetic bracket
1 x type-C power cord
1 x power adapter
1 x target plate
1 x metal panel
1 x AA battery holder
4 x AA alkaline batteries
1 x user manual

We accept the following forms of payment:
1. Credit Card (Visa, MasterCard, American Express, Discover)
2. Debit Card (Visa, MasterCard, Discover)
3. Paypal
4. Paypal Credit
5. Apple Pay
6. Google Pay
7. Shop Pay
8. Affirm Financing (excluding West Virginia and Iowa)
9. Bank Transfer

All official website orders will automatically receive a free 2-year membership warranty.

We insist on providing customers with high-quality products and promise to provide customers with 24-month worry-free after-sales service.

✪

The time frame of an order delivery is divided into two parts:

• Processing time: 1-2 working days
• Shipping time: 2-5 working days

✪

PREMIUM SERVICE, SUPERIOR QUALITY

24/7 Premium service team
Equipped with factory-trained experts, Huepar's consumer service team strives to find the right solution for your needs – from advice to sales and repair & maintenance services.
You can enjoy efficient support from Huepar- we promise to respond in 24hrs and solve the problem in 48hrs.

Lifetime Customer Support
All Huepar products come with lifetime customer support - no worries about exceeding the service period.
All product defects, such as accuracy malfunction, battery and charger damage and requests for replacement parts will be dealt with on time, every time.

Note: Please contact our customer care using online chat service at https://huepar.com/support or email“support@huepar.com”if there is any problem with your payment.